Custom Reclaimed Wood Furniture

This floor-standing sideboard is made to measure from solid reclaimed oak with its original patina. Doors, drawers and reclaimed-wood shelves can be configured for the required storage layout. The displayed 180 × 60 × 90 cm dimensions are a reference configuration; dimensions and internal organisation can be adapted to the project.

This made-to-measure wall-mounted cabinet uses engineered reclaimed oak with its original patina, Push to Open doors and configurable shelves. The displayed 280 × 50 × 80 cm dimensions are a reference configuration. The suspension system is supplied and preinstalled on the furniture; wall-specific plugs, screws and anchors are not supplied.

This floor-standing bathroom cabinet is made to measure from solid reclaimed oak with a planed, smooth surface and an integrated shelf. It receives a matte water-based polyurethane varnish with Aqua Seal properties according to the technical specification. The displayed 160 × 60 × 80 cm dimensions are a reference configuration. Aqua Seal is not a claim of complete waterproofing or immersion resistance.

This made-to-measure floor-standing storage cabinet is built from solid reclaimed oak flooring recovered from former freight-train wagons. Its original patina and relief are retained. A central drawer and open lower shelf organize the displayed 160 × 60 × 80 cm reference configuration; dimensions can be tailored to the project.

This made-to-measure floor-standing bathroom cabinet is built from solid reclaimed oak flooring recovered from former freight-train wagons. The original patina and surface relief are retained. Its open lower shelf forms part of the displayed 140 × 60 × 80 cm reference configuration; dimensions can be tailored to the project.

This made-to-measure wall-mounted bathroom cabinet is built from solid reclaimed oak flooring recovered from former freight-train wagons. Two drawers and an open shelf form the displayed 120 × 60 × 80 cm reference configuration. The original patina is retained and dimensions can be tailored to the project; no undocumented mounting system or load rating is claimed.

MBA30 is a bench without backrest in solid reclaimed oak, with wooden base and crossbar. Its surface retains the original patina, with the nuances, marks and irregularities typical of the recovered material. It can accompany a Table in reclaimed wood Or serve as an autonomous seat. The dimensions indicated are for reference; the bench is made to measure according to the project. It is suitable for indoor and outdoor use; for outdoor use, it receives an outdoor varnish. Reclaimed wood used is covered by the PEFC Recycled certification.

Rivelo MBA31 is a solid reclaimed oak bench without backrest, with wooden base and crossbar. It is designed to accompany the Riviera table Or form an autonomous seat. The dimensions published are reference values; the manufacture is adapted to the project on a tailor-made basis. MBA31 is suitable for indoor and outdoor use; for outdoor use, it receives an outdoor varnish.

MBA32 is the garden bench with backrest from the current range. It combines solid reclaimed oak, a preserved original finish and a wooden structure with crossbar. The dimensions indicated are references: approximately 45 cm for the seat height, without fixing the total height of the backrest. The bench is made to measure according to the project. It is suitable for indoor and outdoor use; for outdoor use, it receives an outdoor varnish. It can accompany a Outdoor table in reclaimed wood.

reclaimed oak beam bench and steel is a bench without backrest made from old solid oak beams. The original surface remains visible, with its relief and variations, while two flat steel legs support the seat. This reclaimed oak beam bench differs from a solid reclaimed oak bench and flat steel by its structural origin and the volume of the wood. The published dimensions serve as a reference and are adapted to the project on a custom basis. reclaimed oak beam bench and steel is suitable for both indoor and outdoor use; for outdoor use, it is treated with an outdoor varnish.

Solid reclaimed oak bench and flat steel combine a backless seat in solid reclaimed oak with two flat steel legs. The original patina remains visible, but the model is not presented as a beam bench: its identity rests on a long line and the contrast between reclaimed wood and metal. The dimensions indicated serve as a reference; the manufacture is adapted on a tailor-made basis to the project. Solid reclaimed oak bench and flat steel is suitable for both indoor and outdoor use; for outdoor use, it receives an exterior varnish. It thus retains its identity as an industrial bench made of wood and metal without repeating the specific construction of reclaimed oak beam bench and steel.

The reclaimed oak glued entry bench is a bench without a backrest, built in reclaimed oak glued and placed on tubular steel table bases. This construction distinguishes it from solid tables and benches in reclaimed oak solid and benches in reclaimed oak solid and flat steel: it should not be described as solid oak. Reserved for the interior, it is suitable for a sufficiently clear entrance or hallway, after checking traffic and the opening of doors. The dimensions indicated are for reference; the bench is adapted to the project on a bespoke basis.

MBA40 is a professional bench in solid reclaimed oak for cafes, hotels and restaurants. Its rounded and smooth surface distinguishes it from models with more pronounced original patina. The dimensions displayed correspond to reference configurations, with about 45 cm as the common seat height; they do not constitute manufacturing limits. The bench is made to measure according to the project, without publishing a fixed total height for the backrest. It is suitable for both indoor and outdoor use; for outdoor use, it receives an exterior varnish. Custom cushions can be integrated; their fabric, colour and composition must be specified in the quote request.

This custom engineered shelf is clad in reclaimed oak with its original patina and surface relief. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions. One or two reclaimed faces can be specified.

This custom engineered shelf is clad in reclaimed oak with a light, planed and smooth surface. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions. One or two reclaimed faces can be specified.

This custom engineered shelf is clad in reclaimed alder with a light-brown original patina. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions. One or two reclaimed faces can be specified.

This custom engineered shelf is clad in reclaimed spruce and pine from old floorboards. Natural patina and visible knots distinguish the surface. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions.

This custom engineered shelf is clad in reclaimed spruce and pine from old floorboards and finished with a protective grey-tinted oil. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions.

This custom engineered shelf is clad in reclaimed spruce and pine from old panelling. Its brown patina and visible knots are retained. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions.

This indoor custom engineered shelf is clad in reclaimed spruce and pine recovered from former exterior panelling. That material origin explains the natural grey patina; it does not make the finished shelf an outdoor product. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions.

This custom engineered shelf is clad in reclaimed spruce and pine from old heavy-timber sections. Tool marks, grain and original patina remain visible; the shelf itself is not solid timber. The displayed 50 × 20 cm format and approximately 40 mm thickness are reference dimensions.

This custom console is built from solid reclaimed chestnut recovered from old beam elements. Its thick top and substantial wooden structure retain the original patina and natural surface variation. The displayed 160 × 40 × 90 cm dimensions are a reference configuration and can be adapted to the project.

This custom solid reclaimed oak console has a thick top, four wooden legs and a lower storage shelf. The original patina is retained. The displayed 160 × 45 × 90 cm dimensions are a reference configuration and can be adapted to the project.

The reclaimed oak ladder console is a rustic console in solid reclaimed oak, supported by two wooden ladders. The original patina remains visible on the tabletop and the structure, with the nuances specific to the recycled material. Its reference depth of 45 cm offers more surface than the reclaimed oak console with A-shaped legs, while maintaining a clear relationship with the wall. The configuration presented measures 160 × 45 × 90 cm; the dimensions are customisable.

reclaimed oak console with A-shaped legs combines a solid reclaimed oak tabletop with an A-shaped leg that clearly structures its silhouette. The original patina retains the grain and marks of reclaimed wood, without masking the geometry of the frames. With a reference depth of 40 cm, it is slightly less deep than the reclaimed oak console with frames. The configuration presented measures 160 × 40 × 90 cm; manufacturing can be adapted to the project.

This custom console is made from solid reclaimed oak. Parts of its wooden trestle base receive a matte-black finish, contrasting with the natural reclaimed oak and retained original patina. The displayed 160 × 40 × 90 cm dimensions are a reference configuration and can be adapted to the project.

This custom solid reclaimed oak entryway console has angled legs and a lower shelf. Its displayed 140 × 35 × 80 cm configuration has a shallow profile for an entrance or passage, and the dimensions can be adapted to the project. The original patina and natural variation are retained.

Narrow marked patina console is a narrow reclaimed oak solid console, chosen for a surface where holes, cracks and irregularities remain visible. Its reference depth of 24 cm, the lowest of the current Consoles, is suitable for walls and passages where the footprint must remain limited. The base, the simple legs and the low crossbar retain a deliberately raw expression. The configuration presented measures 160 × 24 × 90 cm; the dimensions are customisable.